Product 178 of 202
  1. Manufacturer Info
    Share Product
    Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg
  2. This product was added to our catalog on Thursday 22 November, 2018.

    RX-10SR 1/10 TC Kit With Ally chassis (Stock Spec / 37T

    Our Price:   288.00 369.99

    In Stock

    <Destiny RX-10SR New Features>

    l   New design 7075 aluminum front and rear suspension mounts.  Three different size of suspension mounts to makes wider range adjustment on track width from 40.7-49.5mm.

    l   New design plastic eccentric bushing for suspension.  Fine adjustment on toe-in and toe-out angle in 0.3 degree per step.

    l   New design front and rear lower 7075 aluminum bulkheads.  1mm down on transmission.

    l   New design 7075 aluminum motor mount.  Motor position forward/backward changeable.  It makes difference setup of weight transfer on corner response.

    l   New design single piece 7075 aluminum servo mount and steering mount.  It makes change on chassis flex to improve the steering.

    l   New design transmission ratio changeable to compatible with difference race classes, track size or condition.  37T/20T in ratio 1.85, 38T/20T in ratio 1.9 and 40T/20T in ratio 2.0.

    l   New design front and rear shock towers.  Made by USA high grade graphite materials.


    <Destiny RX-10SR Features>

    l   Destiny Alluminium chassis, 2.0mm carbon for upper deck and 3.0mm front and rear shock towers.

    l   2/4/6 deg caster insert is selectable to assembly to c-hub.  Large open on c-hub for easy install or remove front cvd.

    l   All new design on steering knuckle.  Re-position ball bearings and CVD joint CENTER.  Maximum decrease the noise and wheel vibration.  Maximum increase steering efficient and cornering speed.

    l   All new design aluminum wheel adaptors.  Lightweight and reliable on drivetrain.

    l   High grade composite front and rear lower suspension arms, steering knuckles, c-hubs and rear hubs plastic parts from Xenon Racing

    l   Bearing steering rack system design.  More proportional and smooth steering feel.  Quick and easy ackerman adjustment.

    l   Full set low friction coating aluminum damper balls and ball studs.

    l   7075 aluminum rear cvd dogbone.

    l   High precision 4 gears differential with 7075 aluminum weight reduced gear drive cups. 

    l   High quality and lightweight plastic front spool set.

    l   7075 aluminum steering and upper link turnbuckles.  Black color anodized.

    l   High quality hard coated short dampers with POM pistons and 20mm damper springs.

    l   One piece motor mount design with special function of multi chassis flex adjustment by mounting screw position.

    l   Bearing supporting front and rear anti-roll bar system.

    l   64P 114T spur gear from Xenon Racing

    l   17 pcs high grade ball bearings.